brazing

In this paper, a firm joint between steel base and diamond grain was realized by using a high frequency induction welding technique. Ni Cr was used as the brazing alloy and the brazing current and time were carefully controlled.

利用高频感应加热的方法，以Ni-Cr合金为钎料，通过控制电流和加热时间，实现了金刚石与钢基体的牢固连接。

互联网摘选

Brazing alloys will not flow over or bond to oxides.

铜焊合金不能流经或粘结在氧化物上.

互联网摘选

Other dissimilar materials bonding can benefit by pressure brazing.

压力钎焊也有助于其它异种材料的连接.

互联网摘选

Adaptability of brazing filling metal used for monolayer diamond tools with vacuum furnace brazing

金刚石工具真空钎焊钎料的适应性

互联网摘选

Silver Brazing Method: Apply brazing wire or rod at point where tube enters socket.

银钎焊法: 将焊线或焊杆点在里的管道套座上.

互联网摘选

The forming mechanism is different in the fusion layer , brazing layerand heat agglomerating layer.

渗铬层内不同区域的形成机理有较大差别.

互联网摘选

Apply brazing wire or rod at point where tube enters valve socket.

将铜焊线或铜焊条按在插入阀门承插口的管道线上.

互联网摘选

In this paper, the firm and imperishable joint between steel base and diamond grain was realized by using high-frequency induction brazing with the powdered brazing filler metal of alloy Ni-Cr, and by properly controlling the brazing current and time.

采用高频感应钎焊的方法，用Ni-Cr合金粉末做钎料，适当的控制钎焊电流和钎焊时间，实现了金刚石与钢基体的牢固焊接。

互联网摘选

Soft and natural wood, wet wood, very suitable for brazing, planer knives.

软木、天然木材 、 湿木 、 非常适合硬焊, 刨刀.

互联网摘选

The brazing operation has great impact on a cutter's performance.

钎焊作业的好与坏对刀具性能有很大的影响.

互联网摘选

Brazing of copper, copper alloys, silver and molybdenum etc.

钎焊铜及铜合金 、 银、钼等金属.

互联网摘选

Aerospace series-Gold base alloy AU-B 40001-Filler metal for brazing-Wire.

航空航天系列.金基合金AU -B40001.钎焊用填充金属. 金属丝.

互联网摘选

The results obtained have instructive function for brazing technology of gyro housing.

研究结果对陀螺仪壳体的钎焊工艺具有指导意义.

互联网摘选

QJ301 is a copper-based brazing welding used solvent, the solvent particles uniformly fine at a temperature of850-1150 ℃, copper and brass brazing alloys gas welding or brazing flux when used.

QJ301是一种基于铜焊接用的铜焊溶剂，本溶剂颗粒均匀细微，在温度为850-1150℃，钎焊紫铜及黄铜合金气焊或钎焊时作助熔剂用。

互联网摘选

The seal case is welded ordinarily by vacuum brazing.

密封机箱的成型加工采用真空钎焊.

互联网摘选

A trundled multi-station torch brazing machine is researched and developed for applying to the brazing of hydraulic accumulator in compressor.

研究开发了转盘式多工位自动火焰钎焊机，适用于压缩机储液器的大批量钎焊生产。

互联网摘选

Brazing powder alloys include silver, zinc, copper, nickel, aluminum and tin.

我们生产的钎焊合金粉末包括银, 锌, 铜, 镍, 铝,锡等.

互联网摘选

Brazing is started applying heat to the parts to be joined.

开始铜焊时要先在连接部位加热.

互联网摘选

This feature is especially important for a quality brazing processes.

这个特性对工件钎焊质量方面很重要.

互联网摘选

The Al-Cu eutectic brazing metal is made to braze pure aluminium substrate in vacuum. The diffusion phenomenon of Cu in pure aluminum bar under different brazing temperature and heat preservation time is investigated by means of SEM and EDS.

制备Al-Cu共晶合金钎料，用SEM和EDS研究不同钎焊温度和保温时间条件下，纯铝棒料基体对接真空钎焊接头Cu元素的扩散行为。

互联网摘选

The vacuum brazing is a kind of good weld technique.

真空钎焊是一种优良的连接技术.

互联网摘选

The effect on the microstructures of the brazing seam of Ag-CdO contact terminal and Cu contact bridge by different brazing technological parameters including temperature, holding time and joint gap was analyzed. Based on the analysis, the optimum technological criteria put forward.

分析了Ag-CdO触头与Cu触桥钎焊温度、保温时间、钎焊间隙对钎缝组织的影响，并提出了获得理想组织的最佳工艺规范。

互联网摘选

By using this process, the wettability is obviously improved between the hard metal and the liquid state silver brazing flux and copper brazing flux.

采用这种方法可以明显改善硬质合金与液态银钎料和铜钎料的润湿性；

互联网摘选

The whole process of small diameter single-wall brazing tube is described, including stee strip making, forming, brazing, straightening, detection of defects and the treatment of special tube.

论述了Φ12mm以下小口径单层钎焊管的全部生产工艺过程，包括坯料制备、成形、钎焊、矫直、探伤及特殊用途管的处理等。

互联网摘选

However, the composite layer material itself has a very complicated manufacturing process. As differences in manufacturers or production technology, solder thickness and uniformity will affect the heat transfer during brazing and solder flow, which create difficulties for the brazing process.

而复合层材料本身就是很复杂的制造过程，由于生产厂家或生产技术的差异，钎料层厚度及均匀度会影响钎焊时的传热与钎料的流动情况，为钎焊工艺带来困难。

互联网摘选

The furnace is applicable for high temperature degassing and vacuum brazing.

并能广泛适用于高温脱气、真空钎焊等场合.

互联网摘选

Silver Brazing Method: Apply brazing wire or rod at point where tube enters valve socket.

银钎焊法: 将焊线或焊杆点在阀门里的管道套座上.

互联网摘选

For flame brazing and aluminum alloys, a wide range of applications.

用于火焰钎焊及铝合金, 应用广泛.

互联网摘选

Brazing flux influence on processing properties of light beam brazing

钎剂成分对光束钎焊工艺性的影响

互联网摘选

Different fluoride silver brazing fluxes have different brazing behaviors.

含不同氟化物的银钎剂钎焊性能各异.

互联网摘选