shear force

The performance analysis and results comparison between MRF and HADAS-frame indicate that the structural deformation and column shear force are significantly reduced, and the energy dissipation capacity of the structure is increased so that the damage and injury of major structure can be decreased or even avoided.

从试验现象分析和数据对比可以看出，HADAS阻尼器明显减小了结构的变形和框架柱剪力，有效增加结构的耗能能力，减小甚至避免主体结构在设防地震作用下引起的破坏和损伤。

互联网摘选

After high-low temperature shock, its shear force is also very high. The shear force from 16 bumps of diameter 200 μ m is: the low 17.5 N, the high 42.5 N, the average 27.8 N.

而且，经高低温冲击后，仍具有相当高的剪切力：16个直径200μm的凸点剪切力最低为17.5N，最高42.5N，平均值为27.8N。

互联网摘选

The biquadrate vibration equation for fork-probe-sample system is established, the relations between the electric current of the fork and T-S distance ( I-d curves) are analysed theoretically, and the mechanism model of the shear force between the optic fiber probe and the sample is established.

研究了石英调谐音叉控制T-S间剪切力作用的机制，建立了音叉T-S系统的振动方程，理论分析了音叉电流I和T-S间距d的关系，建立了T-S间剪切力作用机制模型。

互联网摘选

Application of no shear force distribution means in antisymmetric loading of symmetrical structure

无剪力分配法在对称结构反对称荷载中的应用

互联网摘选

This method can not only be used to draw shear force diagram quickly, but also to determine the shear sign automatically, and to verify the reaction force of multi-span beam.

该方法不但能快速绘制剪力图，而且自动确定剪力符号，兼可对多跨梁的支座反力进行校核。

互联网摘选

Research on the textural changes of Rongchang suckling pig in the process. ( 1) Adding the nitrite pickled, the hardness and shear force of the pig are reduced.

荣昌乳猪加工过程中的质构变化研究。（1）随着亚硝酸盐添加量的增加，荣昌乳猪腌制后的硬度和剪切力逐渐降低、残留量增加。

互联网摘选

Firstly, shear force in cutting 12 mm steel plate of an inclined blade shearing machine is computed. Then the shearing position, the relation between shear force variation and the cylinder stroke and the shearing process are analyzed, from which the shear force variation is obtained.

首先计算出取样剪在剪切12mm厚度钢板的总剪切力，然后对剪切机构的位置、剪切机构提供的的剪切力与液压缸行程关系以及剪切过程进行了分析，得到剪切过程的剪切力变化情况。

互联网摘选

The result shows that the WTZN clay-free drilling fluid viscosifier is quite effective and improves dynamic shear force and cutting carrying ability.

结果表明：WTZN无固相钻井液增粘剂增粘、提高动切力效果好，有利于提高钻井液携带岩屑能力；

互联网摘选

UNBALANCE SHEAR FORCE DISTRIBUTION CALCULATION OF BRAKE CHAMBER OF ABOIDEAU WHICH WAS CONVERTED INTO TRAPEZOIDAL CROSS-SECTION Discussion on calculation of unbalanced cutting power distribution in the design of sluice bottom board structure

水闸闸室化算梯形横截面上不平衡剪力的分配计算闸底板结构设计中不平衡剪力分配计算问题的探讨

互联网摘选

The plot of the Shear Force Diagram and Bending Moment Diagram is not only important but also difficult for the students to learn in the course of Mechanics of Materials. The Graphic Method introduced in the paper is easy for students to master.

绘制剪力图和弯矩图是《材料力学》课的重点和难点，用本文论述的图解法作梁的剪力图和弯矩图学生易于掌握。

互联网摘选

Non optical methods of sample tip distance regulation based on shear force which include emission detection with PMT, quartz tuning fork, capacitance, piezoeffect, impedance are reviewed in this paper.

本文综述了扫描近场光学显微镜发展以来所出现的基于剪切力原理进行样品／探针间距的探测的一些主要的非光学方法。

互联网摘选

Owing to the swelling of fingernail matrix and recovery of fibers, the indents and scratches on the fingernail samples could be recovered by dipped in water within 10 min. Compared to normal force, the fingernail is more easily damaged by shear force.

由于指甲的基质溶胀和纤维回弹，浸泡在水中10min以内，指甲的压痕和划痕变形均可恢复。相对于法向力，切向力更容易使指甲发生破坏。

互联网摘选

The cutting force and the thermoplastic shear instability can directly influence on machining precision, tool life and surface roughness.

在加工中切削力的变化和热塑剪切失稳的发生将直接影响加工精度、刀具磨损和表面质量。

互联网摘选

Non optical methods of sample tip distance regulation based on shear force in SNOM

近场光学显微镜中利用剪切力原理进行样品/探针间距测控的非光学方法

互联网摘选

Shear force is implicit in the development of bending moments.

杆中的剪力在弯矩的推导中是不明显的.

词典精选例句

The new rotor used in mixer has strong shear force. The waste rubber with the untying cross-linking reagent in the mixing process could achieve regeneration of waste rubber under relatively low temperature.

该新型八棱转子具有强剪切力，能使废橡胶在混炼过程中，在解联剂的作用下，实现再生。

互联网摘选

The vertical beam shear and the bending force calculation; The Plotting of the Shear Force Diagram by the Graphic Method

用图解法作梁的剪力图和弯矩图

互联网摘选

A nonoptical shear force method for tip sample distance regulation

一种探针-样品距离的切变力控制新方法

互联网摘选

The thickness of slab is determined by punching shear capacity. Punching Shear of Concrete Slabs With Shear Rein force ment

其厚度一般是由冲切条件控制的。配抗剪钢筋混凝土板的冲切

互联网摘选

Considering the change of the load transverse distribution coefficient along the bridge span, the maximum value of shear force at supporting point caused by uniformly distributed lane load is calculated by integral method.

考虑荷载横向分布系数m沿桥跨方向的变化，采用积分法对车道均布荷载引起的支点最大剪力进行了计算。

互联网摘选

Experimental Research on Oblique Shear Force of Different Strength Reinforced Frame Column with Different Stirrup Areas

斜向水平荷载作用下不等肢不等强度配箍钢筋混凝土框架柱试验研究

互联网摘选

The assembly of tuning fork and optical fiber probe is used to perform the shear force distance control.

粘接音叉和光纤探针的胶粘剂对由石英音叉和光纤探针构成剪切力控距体系的品质因数有明显的影响。

互联网摘选

By integrating the function, the shear force, bending moment and the angle of rotation of the whole beam are expressed by one equation respectively.

通过积分，全梁的剪力、弯矩、转角和挠度可分别用一个方程表示。

互联网摘选

The limit loading formulae of thick-walled tube with differential strength in tension and compression are derived in the twin shear unified strength theory under the combined actions of both an inner pressure and axial force.

应用双剪统一强度理论，考虑材料的拉压异性和同性，推导了在内压和轴力联合作用下的厚壁圆筒的塑性极限载荷表达式。

互联网摘选

A differential operator arisen from an Euler-Bernoulli beam equation under boundary shear force feedback control is studied. It is shown that the root subspace of the system operator is complete in the energy Hilbert space.

讨论了一个在边界上有剪力反馈控制的Euler-Bernoulli梁方程，证明了其广义本征函数生成的根子空间在能量Hilbert空间中是完备的。

互联网摘选

Combining with three nodes isoparametric axial force element, the new element can be used to accurately calculate the shear flow action between bar and skin in thin-wall structure.

它与三节点等参轴力杆单元组合时可以精确地模拟薄壁结构中杆与蒙皮之间的剪流作用。

互联网摘选

The high tensile stress parallel to the interface exists at the whisker/ reaction layer interface and in TiC near the interface, at which failure occurs easily when shear force is applied.

SiC晶须/反应层界面及其附近的反应产物TiC内具有较高的平行于界面的拉应力，当连接界面承受剪力作用时，SiC晶须/反应层界面和TiC处极易破坏。

互联网摘选

Slide-resistant pile program has realized these fuctions which are given slip surface count internal friction angle, given the shape of sliding surface design calculation, given the landslide thrust design calculation of landslide, given sliding surface moment, shear force design calculation. 5.

抗滑桩程序设计，实现了对给定滑动面形状反算内摩擦角、给定滑动面形状进行设计计算、给定滑坡推力进行设计计算以及给定滑动面处弯矩、剪力进行设计计算的功能。

互联网摘选

The effect of Na~+, F~-and shear force etc.

研究了Na~+、F~-、剪切力以及接种量等对用于生物冶金的一株中度嗜热嗜酸菌生长的影响。

互联网摘选

Dynamic fixation eliminated the shear force between intramedullary nail and locked nail, prevented the nail from breaking and diminished the stress block between the fragments.

动力性固定消除了髓钉与锁钉间的剪力，有效防止了断钉，并消除了骨折端的应力遮挡；

互联网摘选