Preparation and Characterization of Tin-nickel Alloy Electromagnetic Shielding Fabric

1、

Surface-active action of microadding elements Bi, in and Ag in tin-lead alloy solder

微量添加元素Bi、In、Ag在Sn－Pb钎料中的表面活性作用

互联网摘选

2、

In addition, the modified model not only can be used to describe the stress strain response at different strain rates very well, but also can be applied to predict the highly rate dependent multiaxial ratcheting behavior of eutectic tin-lead solder.

同时，修正后的模型不仅能准确描述锡铅钎料在不同应变率下的应力应变滞环，还可以较好的预测材料多轴棘轮效应的率相关性。

互联网摘选

3、

Simultaneous Dissolution of Tin, Silver and Lead in Tin-Lead Solder Alloy and Their Determinations by ICP-AES

同时溶解和ICP-AES同时测定焊锡材料中的铅、锡和银

互联网摘选

4、

Fitting to lower melting point of tin-lead solder, the length of zone of heating is 150mm;

由于含铅钎料熔点低，受热区长度只要150mm就可以了。

互联网摘选

5、

Production Practice of Tin-lead Solder Coating over Semibright Nickel Plating Technics

半光亮镍镀层涂覆铅锡焊料工艺生产实践

互联网摘选

6、

Transducers used in professional loudspeaker systems, using tin-lead solder.

用于专业设备，含有铅锡焊料的积体电路。

互联网摘选

7、

ICP-AES determination of Cu Fe CD Zn Al and Bi as impurities in tin-lead solder

ICP-AES法测定锡铅焊料中铜铁镉锌铝铋

互联网摘选

8、

Determination of tin and lead content in fluoborate tin-lead alloy plating baths

氟硼酸盐锡铅合金镀液中锡、铅含量的测定

互联网摘选

9、

Tin-coat the plug-in contact before soldering.

焊接之前必须给插入式触点涂上锡。

provided by jukuu

10、

The results show that PTFE, MoS2 and graphite as solid lubricants of tin-bronze bearings can reduce the friction and wear under dry friction.

结果表明，几种固体润滑剂的嵌入均可提高轴承的耐磨性，并对减小摩擦系数有一定的作用；

互联网摘选

11、

Archaeological findings verified that a tin-bronze sword unearthed in the Gansu Province was the earliest Chinese bronze casting made 4,800 years ago.

在甘肃省东乡马家窑出土的铜刀，被考古学家证明是4800年以前的青铜器铸件。

互联网摘选

12、

The tin-bronze alloy powder was used to instead of pure copper powder, the test results show that alloy layer crack slowed for using the bronze.

将锡青铜合金粉代替纯铜粉进行比较试验，分析结果表明用青铜的合金层中裂纹有所减缓。

互联网摘选

13、

Tribological Behavior of Tin-Bronze Gradient Self-lubricating Composites

锡青铜梯度自润滑复合材料的摩擦学性能

互联网摘选

14、

Study on the Room-temperature Solid Lubricants Embedded Tin-bronze Materials

常温锡青铜镶嵌型固体润滑剂材料的研究

互联网摘选

15、

Performance Test after Prevent Oxidation Treatment for Sintered Tin-bronze Filter

烧结锡青铜过滤元件防氧化处理前后性能测试对比

互联网摘选

16、

Tin-bronze gradient self-lubricating composites were designed and prepared by powder metallurgy process.

利用粉末冶金工艺设计和制备了新型润滑材料&锡青铜梯度自润滑复合材料；

互联网摘选

17、

The Effect of embedded Solid Lubricant on the Tribological Properties of Tin-Bronze Bearings

镶嵌用固体润滑剂对锡青铜轴承摩擦学性能影响的研究

互联网摘选

18、

Study on Microstructure and Properties of Arc Sprayed Tin-base Babbit Coating

电弧喷涂锡基巴氏合金层组织及性能研究

互联网摘选

19、

The analysis method for lead in tin-base bearing alloy is studied. It is showed from the test that it has high accuracy and wide measure range.

研究了锡基轴承合金中铅的分析方法，试验结果表明该方法准确度高，并且测定铅含量的范围大。

互联网摘选

20、

Analysis method for lead in tin-base bearing alloy

锡基轴承合金中铅的分析方法

互联网摘选