The axial force and thermal fatigue test was carried out with the automatic control system. The destruction process of the film was also recorded.

1、

A Study on Test Life Modification of Heated Components of I.C. Engines after the Accelerating Thermal Fatigue Test

加速热疲劳试验条件下内燃机受热件寿命的修正计算

互联网摘选

2、

Static oxidation test and thermal fatigue test of thermal barrier coating structures were conducted along with related FEM analysis.

进行了涂层高温氧化实验、带涂层构件热疲劳实验及有限元模拟研究。

互联网摘选

3、

Characteristics of inductive heating applied to thermal fatigue test bed for heated engine parts is calculated and analyzed.

对发动机受热件加速热疲劳试验台架的感应加热特点进行计算分析。

互联网摘选

4、

Damage behavior of wheel cast steel was analyzed under thermal fatigue test at 450 ℃~ 20 ℃.

研究了一种铸钢车轮材料在450℃~20℃热循环下破坏行为。

互联网摘选

5、

Thermal fatigue test shows that it is weak in crack extension resistances.

热疲劳试验显示，材料的抗热疲劳性能较差；

互联网摘选

6、

A Safe Life Estimation of Heated Parts in a Diesel Engine with Accelerated Thermal Fatigue Test

柴油机受热件加速热疲劳试验安全寿命估算

互联网摘选

7、

The results show that hot-forged cast dies take thermal wear, plastic deformation, thermal fatigue, impact fatigue fracture and brittle fracture as predominant failure patterns.

结果表明，精铸热锻模的主要失效形式为热磨损、塑性变形、热疲劳裂纹、冲击疲劳破断和脆性断裂。

互联网摘选

8、

Thermal Fatigue in Hydrogenerator-Fracture of the Brake-rings

水轮发电机中的热疲劳&制动环断裂

互联网摘选

9、

The major failure form of solder joints is thermal fatigue and fracture damage, and the deformation behavior and response of stress is very complex due to the complicated service conditions of solder joint.

钎焊点失效的主要形式为热-机械疲劳与断裂破坏，由于焊点服役条件的复杂性，其变形行为和应力响应也十分复杂。

互联网摘选

10、

The thermal fatigue fracture characteristics of a cast steel for wheel in different temperature cycles from 750 ℃ to 20 ℃ have been studied by using SEM.

分析一种车轮铸钢材料在750℃和20℃之间不同温度循环范围的热疲劳断口形貌特征。

互联网摘选

11、

The thermal fatigue fracture behavior of some cast steel wheel material under thermal cycling of 600~ 20 ℃ was studied.

研究了铸钢车轮材料在循环温度幅600~20℃下的热疲劳断裂行为。

互联网摘选

12、

Probe into thermal fatigue fracture behaviour of certain cast steel wheel material under thermal cycling of 600 ℃~ 20 ℃

铸钢车轮材料在600℃~20℃循环温度幅下热疲劳断裂行为探讨

互联网摘选

13、

The thermal fatigue fracture behavior of wheel cast steel at 700 ℃~ 20 ℃ is studied by using SEM.

研究铸钢车轮材料在700℃~20℃热循环温度幅下热疲劳破坏规律。

互联网摘选

14、

The thermal fatigue fracture belongs to cleavage fracture.

热疲劳断口具有穿晶解理特征。

互联网摘选

15、

Study on Thermal Fatigue Fracture Characteristics of Thermally Sprayed Coating on Wheel Cast Steel

铸钢车轮材料热喷涂层热疲劳试验断口特征分析

互联网摘选

16、

Thermal fatigue fracture analysis and strengthening for materials of nodular cast iron roll

球铁轧辊材料的热疲劳断裂及强化

互联网摘选

17、

The Study of Thermal Fatigue on Ductile Iron for Diesel Engine Piston

柴油机活塞球墨铸铁材质的抗热疲劳性研究

互联网摘选

18、

The thermal fatigue properties declined when Cr increased to 8%.

铬含量增大到在8%时热疲劳性能下降。

互联网摘选

19、

Study on Thermal Fatigue Property of Various Matrix Ductile Irons

几种球铁热疲劳性能的研究

互联网摘选

20、

Investigation on thermal fatigue performance of white cast iron alloy of rollers

轧辊材质热疲劳行为的研究

互联网摘选