wall angle

The effect of relevant process parameters, namely tool radius, sheet thickness, step size, wall angle, yield stress and hardening exponent, upon their intensity was statistically analyzed.

对工具头半径、板厚、加工步长、成形角、屈服应力和加工硬化指数等参数对成形缺陷的影响程度做了计算。

互联网摘选

The analysis of seismic responses of shear-wall structures with angle windows

开设转角窗剪力墙结构的地震反应分析

互联网摘选

Fourth, the paper consider whole effect of underground and overground structure, calculate the internal force and displacement of diaphragm wall in the angle of structure component in coordination and contrast with design method which generally adopt in engineering.

考虑地下及地上结构的整体效应，从结构构件协同作用的角度计算地下连续墙的内力和位移，与工程上普遍采用的设计方法对比分析。

互联网摘选

A Calcuation of Stage Characteristics by use of Static Pressure Data of a Compressor Interstage Outside Wall& Deviation Angle Iteration Method

用压气机级间外壁静压数据计算级特性&落后角迭代法

互联网摘选

The hardening exponent appeared as the most influential parameter for the development of bulge. The bulge height showed increase with increase in hardening exponent, sheet thickness and step size and decrease with increase in wall angle.

加工硬化指数是产生底部凸包现象相关性最大的因素，上凸的高度随加工硬化指数、板厚和加工步长的增加而增加，随成形角的增加而减小。

互联网摘选

Principes and some suggestions are proposed that should be followed when a convergence or divergence diffuser is used in design. The method selecting the wall slope angle is provided.

提出了在设计中采用收敛形或扩张形扩压器时所应遵循的原则和建议以及壁面收敛角的选择方法。

互联网摘选

Finally, the effects of the properties of backfilled clay and the smoothness of the retaining wall on the angle of rupture are discussed.

最后，讨论填土的物理力学参数和墙背摩擦因数对破裂角的影响。

互联网摘选

The designing procedure of gravity retaining wall when excavation angle is bigger than surface soil frictional angle

开挖坡度角大于土体表层内摩擦角情况下重力式挡土墙设计程序

互联网摘选

Unloading Technology of Facing Brick for Exterior Wall External Insulation with Angle Steel Bracket

外墙外保温饰面砖角钢托架卸载体系技术

互联网摘选

FEA explained that the increase in wall formation with increase in wall angle is because of increase in contact pressure and compressive stresses along tool axis.

有限元分析结果表明，挤出飞边现象的加剧是由于工具头轴向上的接触力和压应力增加造成的。

互联网摘选

Simulation results show that the micro cutting is more when abrasive particle impacting wall with certain angle.

仿真表明磨粒以一定倾斜角度撞击壁面时，形成的微切削更大。

互联网摘选

In order to avoid such a failure, an empirical model in terms of four process parameters, namely sheet thickness, step size, wall angle and yield stress, was developed to compute the minimum safe limit of tool radius.

为了避免这种失效，本论文中提出了一个以板厚、加工步长、成形角和屈服应力为变量的经验公式，以计算工具头半径的最小值。

互联网摘选

FEA revealed that the decrease in bulge height with increase in wall angle and decrease in sheet thickness is due to localization of von-mises stresses around the tool.

有限元分析结果表明，上凸高度随成形角的增加而减小、随板厚的减小而减小是应归因于工具头周围的Von-Mises应力分布。

互联网摘选

Experiments on wall angle fire and window fire reflected the wholly flame-spread retardancy of exterior insulation system in real fire.

墙角火和窗口火两种试验能较真实地反映外墙外保温体系在实际火灾中的整体抗火能力。锥型量热计试验可用于外保温工程的常规检验。

互联网摘选

The wall's at a slight angle.

这面墙有点歪。

《柯林斯高阶英汉双解学习词典》

To Measure Wall Friction Angle of Dolomite and Limestone

白云石、石灰石壁摩擦角的测量

互联网摘选

Liquid forging processing to thin wall waveguide angle head has been experimentally studied.

本文对簿壁波导弯头件的液态模锻成形进行了研究。

互联网摘选

It was found that metallic wall and fold-in appear only when thick sheet is processed with small radius tool. And after their appearance, their intensity increases as the wall angle, step size and yield stress increases.

结果发现挤出飞边和向内褶皱在使用小工具头加工厚板的时候容易出现，其程度随成形角、加工步长和屈服应力的增长而增大。

互联网摘选

Place the table at right angles/ at a right angle to the wall.

将桌子跟墙垂直摆放。

《牛津高阶英汉双解词典》

How to plan reasonable process planning of thin wall part, sharp angle and curved surface in SDS were studied and corresponding solutions were performed.

对分段沉积/雕铣成形技术中零件的分段、薄壁件的加工、尖角的加工、曲面的加工等一些特殊工艺进行合理的工艺规划，提出解决措施。

互联网摘选

By the analyzing of the variation of the attenuation degree and the keyhole front wall angle, the relationship between the optical radiation feature and the weld dimension was established, and the detection of the weld dimension was realized.

通过分析匙孔区域的光辐射衰减程度和匙孔前壁角度的变化，将光辐射分布的特征与焊缝的尺寸结合起来，建立了两者之间的对应关系，从而实现了焊缝尺寸的检测。

互联网摘选

The results indicate that the horizontal component of reaction force from the die wall increases with the angle ψ, which is helpful for the deformation of billet. Consequently the extrusion load decreases with angle ψ.

结果表明：随着ψ角的增加，通道壁支反力的水平分量随之增大，有助于试样的变形流动，从而降低挤压载荷的大小；

互联网摘选

The relations of the performance to the geometrical and flow par-meters of non-parallel walled radial vaneless diffusers and the rules of diffuser performance parameters changing with the wall slope angle are analyzed.

本文分析了非平行壁径向无叶扩压器的性能与几何参数和流动参数之间的关系以及扩压器性能随壁面倾斜角的变化规律；

互联网摘选

The patterns etched are of high resolution, and the groove depth and groove wall angle can be controlled with less surface stress.

具有极高的分辨率，能够控制槽深和槽壁角度，表面应力小。

互联网摘选

A wall correction at high angle of attack in low-speed wind tunnel using wall pressure signature method

壁压信息法低速大攻角洞壁干扰修正

互联网摘选

The mould design was introduced about a kind of plastics shell, in which inside wall has angle, automatic knockout and constant-temperature apparatus.

介绍一种塑料外壳内壁带角度（倒钩）自动脱件及浇口并带有恒温装置的模具设计。

互联网摘选

The wall is leaning at such a dangerous angle that it wouldn't take much effort to push it over.

这墙已经倾斜成这样危险的角度,不要费多大力气就可以把它推倒了.

《简明英汉词典》

There, against an angle of a wall, he made a struggle to look about him.

他在那儿凭借了一堵墙的拐角的力量才挣扎着向四面看了看.

英汉文学 - 双城记

The results showed that side wall and axillaries angle of inverted-siphon usually under high stress, it should be enhance them. Meanwhile, seam wall usually under low stress, it could be considered to reduce the size or reinforcement ratio of the wall.

分析结果显示，管身边墙和腋角处容易产生较大应力，应考虑对其进行加强处理，缝墙的应力均处于较低状态，可考虑减小缝墙的尺寸或配筋率。

互联网摘选

Place the table at right angles/at a right angle to the wall.

将桌子跟墙垂直摆放。

《牛津高阶英汉双解词典》