stress limit的例句大全

Confirmation of rotor's dynamic thermal stress limit value during unit's auto-start-up

机组自启动过程中转子动态热应力限定值的确定

互联网摘选

Test results show that two discontinuity points could be found in tensile stress-amplitude attenuation curve, they correspond to long time strength and creep failure limit respectively.

结果表明，拉伸过程中混凝土内部结构存在2个不连续点，它们分别与持续高技应力下的持久强度和徐变破坏极限较好地吻合。

互联网摘选

The results show an apparent decay in the Hugoniot elastic limit with increasing propagation distance, as well as a stress relaxation behind the elastic wave front, and nearly 44% loss of Hugoniot elastic limit was observed in the present sample thickness range.

实验结果显示：Hugoniot弹性极限随着传播距离呈指数衰减，在所研究的样品厚度范围内，Hugoniot弹性极限减小了44%；

互联网摘选

Concrete behavior under the biaxial state of stress is represented by a nonlinear constitutive relationship, which incorporates tensile cracking at a limit stress, tension stiffening and shear retention effects for cracked concrete, and the strain-softening phenomenon beyond the maximum compressive strength.

混凝土的非线性本构关系，则考虑受拉开裂、开裂后的拉伸加强效应和剪切折减系数以及屈服后的应变软化现象。

互联网摘选

The stress and deformation under elastic-plastic behavior are given for the structure of combined thick cylinder, and the simple deformation on the influence of structural plastic limit load is discussed.

给出了组合厚壁圆筒结构在弹塑性状态下的应力及变形情况，并且论述了筒体变形对结构塑性极限荷载的影响。

互联网摘选

Shakedown analysis of a thick-walled cylinder of elastic-perfectly plastic material is presented in terms of the twin-shear unified criterion. The unified analytical solutions of the loading stress fields, the residual stress fields and the shakedown limit pressure of the thick-walled cylinder are derived.

采用双剪统一强度准则对理想弹塑性材料的厚壁圆筒进行安定性分析，得出了厚壁圆筒加载应力、残余应力及安定极限压力的统一解析解。

互联网摘选

During the production of casing, it will give birth to residual stress. This kind of residual stress will decrease the tensile yield limit and compressive yield limit of casing greatly.

在套管的生产过程中会产生残余应力，这种残余应力将大大降低套管的拉伸屈服极限及压缩屈服极限，进而降低套管的抗挤强度。

互联网摘选

The stress in thread head and the root of first engaged tooth on tail beyond yield limit.

螺纹端部和尾部第1啮合齿的根部已进入屈服区。

互联网摘选

Through the repeat impact test of coating workpieces and comparison between the changes of coating and base thickness under different impact times, it is finded that under impact stress even less than yield limit, material of workpieces appeared macroscopical plastic deformation.

通过对带涂层试样的多冲试验，对不同冲击次数下涂层和基体的厚度变化进行对比，发现即使在低于材料屈服极限的冲击应力下，材料也会产生宏观塑性变形。

互联网摘选

Once compressive residual stress is induced in the notched area, the residual stress concentration factor can be higher than the theoretical stress concentration, therefore the notched fatigue limit can be higher than the highest smooth fatigue limit.

缺口试件引入残余压应力，由于应力集中效应，缺口根部的残余应力集中系数可能高于理论应力集中系数，因而其疲劳强度将超过最高的光滑试件疲劳强度。

互联网摘选

The paper also explores the impact of track bed resistance, fastening resistance, filler resistance, and spacing between master block and slave block of the limit device on track stress and track deformation.

探讨道床阻力、扣件阻力、间隔铁阻力以及限位器子母块间隙对钢轨受力与变形的影响。

互联网摘选

Furthermore, the FEM limit analysis also proves that the stress slip line, ultimate load and velocity slip line are all the same if they are obtained by either associated or non-associated flow rule, but only the velocity vector shows difference.

通过极限分析有限元法，再次证明了滑移线场理论中用关联流动法则与非关联流动法则可得到相同的应力滑移线、极限荷载及速度滑移线，只是速度矢量方向不同。

互联网摘选

The limit equilibrium method and finite element analysis method are currently the main method of slope stability analysis. Finite element method includes finite element strength reduction and FE slope method based on slip stress.

极限平衡法和有限元分析方法是目前进行边坡稳定分析的主要方法，其中有限元法包括有限元强度折减法和滑面应力分析法。

互联网摘选

It has helped maintain banking stability during a period of considerable stress, and, no less important, it has helped limit the problem of negative equity.

这项指引有助银行业在面对极大压力的期间保持稳定，同时亦有效控制负资产问题，不致变得一发不可收拾。

provided by jukuu

Examples show that with consideration of differences of mechanical properties in shear sliding section, maximum dangerous slide face by method of limit equilibrium will degenerate into vice dangerous slide face; and stepping slope face will dissipate stress concentration at the toe of slope.

实例表明，在考虑剪滑段力学性质差异的情况下，通过极限平衡法搜索的最危险滑动面退化为次危险滑动面，且坡面分阶对坡脚应力集中的消散作用。

互联网摘选

Cap plate reinforcement method can limit deformation of shore structure and soil, but due to the slant pile cap connection on the consolidation of the steel sheet pile, the position will add greater stress solid.

斜顶桩桩顶钢筋混凝土顶板法能够限制接岸结构及土体的变形，但是由于将斜顶桩桩帽于钢板桩固结连接，该位置加固体的应力将较大。

互联网摘选

Bom showed under the condition of ground surface deformation, tension or compression, the presence of foundation slip layer reduces the additional stress effectively, and there is an upper limit for effect of horizontal deformation of ground surface to superstructure limit.

分析与试验都表明，在地表拉伸或压缩变形条件下，基础滑动层的设置均能有效地降低墙体和加固构件的采动附加应力，地表水平变形对上部结构的作用存在上限值。

互联网摘选

The stress in primary support is very large especially in profiled bar steel frame, the inner and outside edge of steel frame are in stress condition and most steel frame stresses exceed steel yield limit, the steel stress in unstable condition;

初期支护受力很大，特别是钢架内、外缘均处于受压状态，而且钢架大部分均超过钢材的屈服极限，钢架处于失稳状态；

互联网摘选

It indicates that stress-strain relation is linearity before the off-set limit and has complicated non-linearity performance after off-set limit.

本构方程表明应力与应变在屈服极限之前是线弹性阶段；在屈服极限之后表现出复杂的非线性特性。

互联网摘选

The grouping test is conducted in higher stress region in order to gain the fatigue life, S-N curve and the inferior limit of fatigue life. The confidence level of grouping test is90%.

进行成组法试验获得较高应力下的疲劳寿命、S-N曲线及疲劳寿命下极限，试验置信度为90%。

互联网摘选