slip velocity的例句大全

Local gas-solid slip velocity in riser

提升管中气固相的局部滑移速度

互联网摘选

It was found that when Kn 0.001, with the increasing of Kn number, the slip velocity on wall boundary increases;

当Kn0.001时，边界滑移速度随着Kn的增大而增大；

互联网摘选

Calculations of Annular Slip Velocity in the 2nd Cleaning Area during Horizontal Drilling

水平井钻井第二洗井区环空止动返速的计算

互联网摘选

If the average slip velocity is zero, there is no holdup of one phase relative to the other.

如果平均滑移速度为0，也就没有一相对另一相的滞留。

互联网摘选

The predicted results show that the slip velocity near walls made the flow resistance in this microchannel decreases with increasing Kn.

计算结果表明：壁面的速度滑移使流动阻力随Kn数的增加而减小。计算结果表明：微环缝槽道内的摩阻系数随Kn数的增加而减小；

互联网摘选

While with the increase of the circulating amount of the system, negative pressure gradient and slip velocity in the standpipe increase too.

而随着系统循环量的增加，立管内的负压差梯度以及滑移速度均增大；

互联网摘选

The influences of different Kn numbers on the slip velocity and jump temperature are investigated.

比较了不同克努森数Kn对于滑移速度和跳跃温度的影响。

互联网摘选

On the Slip Velocity of Gas-Liquid Flow In Vertical Pipes

垂直套管中气液流动滑脱速度的研究

互联网摘选

Local Gas-Solid Slip Velocity in the Riser of the Circulating Fluidized Bed

提升管循环流化床气、固局部滑落速度的分布

互联网摘选

Re number makes little effect on the slip velocity under the condition of low Re number and slip flow regime.

在滑流区范围内与低Re时，Re的变化对边界滑移速度的影响很小。

互联网摘选

The survey results of fault deformation as well as the thermoluminescent dating on the fan top and fault slip velocity are also given.

文中还给出了断层陡坎变形的测量结果，冲洪积扇扇顶热释光年龄和断层滑动速率。

互联网摘选

The results show that in the later stage of the nucleation process,① The maximum slip velocity is monotonically accelerating;

结果表明，在成核的后期阶段：①最大位移速率单调加速增加；

互联网摘选

The influence factors in the micro-injection process were analyzed systematically and the micro viscosity model and wall slip velocity model were introduced. 2.

对微注塑成型熔体充填过程中的影响因素进行了系统的分析，并引入了Eringen-Okada微观粘度模型和Rosenbaum-Hatzikiriakos壁面滑移速度模型。

互联网摘选

Larger slip coefficient produces larger slip velocity, fatter radial velocity profile, smaller pressure and squeeze force.

当滑移系数增大时，壁面的滑移速度增大，径向速度的剖面更加扁平，流体压力减小，圆盘挤压力减小。

互联网摘选

In order to achieve improved accuracy for no-slip velocity boundary conditions, a new method based on the idea of standard bounce-back scheme was proposed.

为更好地满足速度无滑移条件，对标准的壁面反弹边界条件进行了改进，提高了计算精度。

互联网摘选

Liquid-solid circulating fluidized bed(ⅱ) studies on the apparent slip velocity and drag coefficient

液固循环流化床的研究（Ⅱ）表观滑落速度及曳力系数

互联网摘选

Effect of different road surface, ambient temperature, contact pressure and slip velocity on friction coefficient is apprehended.

初步掌握了路面、温度、垂直压力和滑移速度等因素对摩擦因数的影响。

互联网摘选

According to the simulation data of slip velocity and adhesion coefficient, a fuzzy model, RV-TS model, is built to describe the adhesion characteristic curve.

通过仿真实验，采集蠕滑速度和粘着系数的数据，利用RV-TS模型对粘着特性曲线进行模糊建模。

互联网摘选

Prediction model for the wall slip velocity of a Bingham flow pipe

宾汉流管壁滑移速度预测模型

互联网摘选

The results show that either the channel surfaces were hydrophobic or hydrophilic, the slip velocity increases with the augment of external force.

研究表明：无论在疏水性还是亲水性通道，滑移速度均随外力的增大而增大；随通道宽度的减小，减阻率明显增大，显示出表面力在微纳米尺度下对流体流动的影响。

互联网摘选