profile accuracy的例句大全

The design concept of flexure supporting structure is proposed for mirrors with higher profile accuracy requirements.

针对面型精度要求较高的反射镜,提出了柔性支撑结构的设计思想.

互联网摘选

Gear grinding quality includes many contents. Here means primarily profile accuracy, tooth spacing accuracy, tooth flank roughness, flank grinding burn, and so on.

磨齿质量涉及内容广泛，这里主要指的是齿形精度、齿距精度、齿面粗糙度、齿面磨削烧伤等。

互联网摘选

If the rolling dies are not preciously designed or the machining operation is not properly implemented, there is an influence on the profile accuracy, noise and service life of the workpiece gears.

若辊模设计不合理或加工方法不当，将影响工件齿轮的齿形精度，产生噪声，降低使用寿命。

互联网摘选

Analysis of the reground profile accuracy of the hard surface skiving hob

硬齿面刮削滚刀重磨齿形精度分析

互联网摘选

It is a valuable method to true diamond or CBN wheel with a GC Cup Truer, but the mechanism of profile generation and analysis for the profile accuracy of trued wheel is still awaiting elucidation.

用GC杯形砂轮修整金刚石砂轮和CBN砂轮，是一种有效的修整方法，但这种修整方法的修整成形机理和被修整砂轮的廓形精度分析亟待解决。

互联网摘选

Profile Design and Accuracy Analysis on Gear Hob of Front Rake Angle

正前角齿轮滚刀的齿形设计和精度分析

互联网摘选

Cold-formed profile steel unit weight of the cross-section is better than the performance of hot-rolled profile steel products, and has a very high surface finish and dimensional accuracy, so instead of hot-rolled profile steel, cold-formed profile steel can have dual-effect to steel-saving as well as energy-saving.

冷弯型钢单位重量的断面性能优于热轧型钢产品，并且具有很高的表面光洁度和尺寸精度，因此冷弯型钢代替热轧型钢可以取得节约钢材又节省能源的双重效果。

互联网摘选

Such being the case, accuracy of test results can be obtained through verification on condition that a model is similar to prototype, departure from water surface profile is in a limit required and distribution of flow velocity on cross-section coincides basically with each other.

在此情况下，通过验证试验，只要做到模型与原型基本相似，水面线的偏离处于要求范围内，流速沿断面的分布基本上与原型一致，这样就可以保证试验成果的可靠性。

互联网摘选

This paper is intended to describe the mechanism of profile generation during process of being trued by the Cup Truer and the way to improve the truing accuracy of the CBN quill.

研究了用杯形GC砂轮修整器修整小直径CBN砂轮的成形机理和提高直线精度的方法。

互联网摘选

At present, traditional processes of hob are radial relief grinding in general, when we adopt this process, it will cause tooth flanks distortion, reduce hob proper tooth profile, and be lead to hob accuracy lower, which restricts gear hobbing level further seriously.

目前滚刀一般采用径向铲磨方式进行精加工，由于径向铲磨会造成齿侧面畸变，减小齿形合格长度，导致滚刀精度寿命低，径向铲磨工艺严重制约着滚齿加工水平的进一步提高。

互联网摘选

therefore, it is necessary to develop aspherical surface profile measuring device with high accuracy for wolter mirror.

为此，研制高精度的非球面表面面形测量装置具有重要意义。

互联网摘选

Objective : To analyze the accuracy of linear accelerator beam profile characters measured by 2 D diode array.

目的:分 析二维半导体矩阵检测直线加速器射野离轴剂量分布特性的准确性.

网络文摘精选

Belt: Reinforced Polyurethane light weight, high strength, low stretch trapezoid profile eliminates slip, greater accuracy.

皮带: 钢筋聚氨酯重量轻, 高强度, 低拉伸梯形配置消除滑, 更准确.

网络文摘精选

Taking into account of the requirements in terms of aerodynamics, structural mechanics and aesthetics, automotive extrusion profiles are generally need to bend into a certain curvature. So it proposes a higher demand on surface quality and accuracy of the curved profile.

考虑到空气动力学、结构力学和美观等方面的要求，车身用挤压型材一般都需要弯曲成一定的曲率，从而对弯曲型材的表面质量和准确度提出了更高的要求。

互联网摘选

The value of tooth deformation is the key-influencing factor on machining accuracy of tooth profile.

轮齿的形变情况是决定齿形加工精度的因素.

互联网摘选

In order to virtually test the accuracy of profile data obtained through the plunge shaving cutter CAD system, it is necessary to model the flank of the plunge shaving cutter.

为了虚拟检验径向剃齿刀CAD系统的正确性，有必要对刀具齿面进行建模。

互联网摘选

We should have an objective understanding of the accuracy, particularity and reliability of the psychological profile conclusion, and can't expect too much of it.

对心理画像结论的准确性、具体性和可靠性程度应该有客观的认识，不能对其怀有过高的期望。

互联网摘选

The both-way inclination optical measurement is presented based on the thread contour character, solves the problem that traditional optical method is hard to measure the large slope object and increases the value collection accuracy of the thread profile.

针对螺纹形面特点，提出了光学双向倾斜扫描坐标测量方法，双向倾斜扫描测量方法克服了传统光学方法对大倾斜面物体难以测量的困难，提高了螺纹形面数据采集精度。

互联网摘选

What's more, by revising log-ging techniques and interpretations, workers can spot bursts during injection profile logging more easily and improve the accuracy of transition time on asymmetric chart.

在此基础上，通过改变测井工艺以及改进解释方法，还可以较好地识别出注入剖面测井中的“反吐”现象和提高在非对称谱中渡越时间的求解精度。

互联网摘选

Unlike other common gear machining process, ausform finishing integrates heat treatment and tooth profile machining press into one single manufacturing operation, which is beneficial to enhance productivity, obtain high machining accuracy and high performance of the gear.

突破了传统的齿轮加工工艺，该技术采用形变热处理原理，把热处理过程和齿形加工过程统一起来，有利于提高效率、保证加工精度和齿轮的整体使用性能。

互联网摘选