nonlinear element的例句大全

A spatial beam element is adopted in the nonlinear analysis. The large deformation of the structure is considered by constructing the incremental tangent stiffness matrix which consists of both geometric stiffness matrix and defamation matrix.

采用空间梁单元，通过包含单元几何刚度阵和变形刚度阵的增量切线刚度法考虑大变形问题；

互联网摘选

Elastic analysis for soil-foundation interaction by using a nonlinear contact force element model

非线性接触力学模型在地基-基础相互作用弹性分析中的应用

互联网摘选

In this paper, the element tangent stiffness matrix of spatial fold cable element under initial stress condition and nonlinear simultaneous equations for finite element method which can be used in nonlinear analysis and calculation of prestressed lattice structures are developed by studying the prestressed cable element.

通过对于预应力索单元的分析研究，推导了具有初始应力的空间折索单元的单元切线刚度矩阵的计算公式，并且建立了可用于预应力空间网格结构非线性有限元分析的非线性方程组。

互联网摘选

This article uses nonlinear finite-element method, including both geometric and material nonlinearity, when modeling a axisymmetric loaded tank shell model in a typical range of dimension by a quasi-static elastic-plastic buckling approach.

在考虑大变形几何非线性和材料非线性条件下，本文利用非线性有限元法，以轴对称载荷壳单元模型，对一定尺寸范围内的储罐进行了准静态弹塑性屈曲分析。

互联网摘选

Nonlinear Finite Element Dynamic Analysis on Reinforced Concrete Frame Strengthened with Steel Plate in Case of Damnification

粘钢加固受损砼框架非线性有限元动力分析

互联网摘选

Using the software ANSYS, the nonlinear finite element analysis of the cast steel joints for the center of exhibition and sport in Nantong is presented.

本文结合南通体育会展中心工程中的铸钢节点，运用大型通用有限元程序ANSYS对铸钢节点模型进行了非线性有限元分析，并与试验实测值进行比较。

互联网摘选

The criterion of the element with the maximum tensile stress will crack is presented, the iteration flow diagram of nonlinear analysis is improved, and then the position, gap and width of crack can be computed based on ′ smeared ′ crack model.

本文采用最大拉应力单元开裂准则，改进了非线性分析的迭代流程，使其最大可能地模拟实际结构的开裂情况，进而可以基于分布裂缝模式计算裂缝发生位置、裂缝间距、裂缝开展深度和宽度。

互联网摘选

the finite element model considering the nonlinearity of the supports and restrainer and pier is established to study the nonlinear seismic response of the bridge structure.

建立了可以综合考虑支座非线性、限位装置接触及材料非线性、墩身弹塑性的桥梁结构有限元模型。

互联网摘选

axial crushing energy dissipation behavior of metal tube, glass/ epoxy round tube and metal tube enlaced by glass/ epoxy is simulated and investigated by nonlinear finite element.

结合复合材料的破坏理论研究了金属管、复合材料管（玻璃/环氧）、复合管（缠有玻璃增强环氧的金属圆柱管）在轴向撞击载荷下的能量吸收特性。

互联网摘选

nonlinear finite element analysis of 72 overlap tubular k-joints and 18 zero-gap k-joints is carried out.

对72个K型圆钢管搭接节点和18个零间隙节点进行了非线性有限元分析。

互联网摘选

nonlinear finite element analysis of metallic hose

金属软管的非线性有限元分析

互联网摘选

projects of excavation constructions of triple-span arch culvert are simulated using nonlinear finite e element analysis program.

利用非线性有限元程序，对三跨拱涵开挖施工方案进行模拟。

互联网摘选

Pipe-soil interaction and movable supports influencing seismic response of suspended pipeline are investigated and seismic responses of free spanning are analyzed by nonlinear finite element method.

本文充分考虑了管-土相互作用和支座非线性因素的影响，采用非线性增量有限元方法对悬垂管道跨越结构在地震作用下的反应进行了分析。

互联网摘选

nonlinear finite element analysis of the settlement of soft soil roadbeds

软土路基沉降的非线性有限元分析

互联网摘选

Nonlinear Finite Element Analysis on Connection Performance of API Round Thread Tubing Joints

API圆螺纹油管接头连接性能的非线性有限元分析

互联网摘选

nonlinear finite element analysis of the ultimate bearing capacity of reinforced circular tubular gapped k-joints with a flashboard

插板加强K型间隙圆钢管相贯节点的极限承载能力非线性有限元分析

互联网摘选

by choosing appropriate two and three-dimensional mechanical models and simple effective analytical method, finite-element program "ansys" is applied to calculate and analyze the models largely in the method of simulation. in these models, material nonlinear and boundary nonlinear are considered.

通过选用合适的平面和空间计算模型、简单有效的分析方法，考虑了材料的非线性和边界条件的非线性，应用大型有限元程序ANSYS对所建模型进行了大量的模拟分析计算。

互联网摘选

the nonlinear finite element design and analysis of construction of power transmission tower

输电杆塔结构的非线性有限元设计分析

互联网摘选

the nonlinear finite element analysis of 1 ∶ 10 reinforced concrete wall of a chimney foundation model is carried out. comparison between the analytic strain and the experimental strain shows that the analytic model and parameters are reasonable.

对1∶10空腔壳基础模型结构的破裂进行了弹塑性有限元分析、计算值与试验值的比较，说明了计算模型和计算参数基本合理；

互联网摘选

in this paper a thorough mechanical analysis of rubber-steel biomaterial was performed using nonlinear finite element approach.

本文主要采用有限元方法对橡胶钢双材料进行非线性有限元分析和破坏机理研究。

互联网摘选