As long as the prediction is realized, you can throw a reunion party and reveal the results together.

Like when I was at the25 year class reunion last spring.

记得是25岁那年春天班级聚会。

provided by jukuu

Putting together a photo display for a class reunion.

为一个班级聚会布置一个照片展。

provided by jukuu

Ivy: Will you be at the class reunion next year?

Ivy：明年班级聚会，你们会来吗？

互联网摘选

Let's have a class party this Saturday!

这周六我们开个班级聚会吧！

互联网摘选

The Torque-constraining AC System for NC Turning and Its Stability

数控车削过程约束扭矩适应控制系统及其稳定性

互联网摘选

From the final simulation results and road test results, it can be found that the special structure and the corresponding control strategy of E.T.Driver can greatly enhance the gear shift quality, driving smoothness and driving comfort of HEV compared with the traditional AMT.

最终的仿真和道路试验结果表明，变速驱动单元的特定结构，结合本文提出的E.T.Driver最优扭矩换档控制策略，相比传统AMT，E.T.Driver能够极大的提高换档质量、整车驱动平顺性和乘坐舒适性。

互联网摘选

It also deeply researches on controlling methods. The research includes people, process, tool, error-proofing, QCOS system torque quality control plan and implement.

并对实施控制手段开展深入研究，研究包括人员、工艺、工具、防错技术、QCOS系统等扭矩质量控制计划及实施方案。

互联网摘选

Control of Residual Torque in DTY Production

DTY生产中残余扭矩的控制

互联网摘选

To reduce the absorbing torque interference of eddy current dynamometer cased by variable rotating speed, the decoupling control project of compensation torque is put forward, which compensation torque is determined by the feedback and prediction of vehicle speed on testing conditions.

为降低转速变化对电涡流测功器吸收扭矩控制的影响，提出了测试工况扭矩车速反馈预测补偿解耦控制方案。

互联网摘选

Therefore, thread link torque control is very important to the vehicle quality. The vehicle manufacturing enterprises are researching a effective way to control the torque all along, including state torque controlling and dynamic torque controlling.

因此，螺纹联接扭矩控制对车辆整体质量至关重要，汽车制造企业一直在研究扭矩控制的有效途径，常见的包括静态扭矩监控、动态扭矩监控等。

互联网摘选

With the help of the control theory of mechanical engineering, it analyzes the torsion in heating roller of printing machine, designs the economical project to educe the power by the heating roller and driving roller.

利用机械工程控制理论，对印刷机械中的预热辊的扭矩控制进行了分析，设计出了它的控制方案。

互联网摘选

Hydraulic loading system with secondary regulation is designed based on secondary regulation technique including two parts, rotational speed control and torque control, which are connected stiffly and coupled heavily with each other.

次级调节液压加载实验台是基于次级调节原理设计而成的，它主要包括转速控制和扭矩控制两个组成部分，两者之间刚性连接，存在着严重的耦合现象。

互联网摘选

It proves that the improved efficiency and the good control effect of 3 control modes of system ( engine starting, constant speed control and constant torque control) through experiments.

试验表明，在发动机起动、恒转速控制以及恒扭矩控制3种情况下，系统控制效果良好，响应较快较平稳，为之后的动态控制奠定了基础。

互联网摘选

Nowadays, the commonly used method of tightening screw thread is torque control method, which causes decentralization of axial pre-tightening force, and decreases the reliability of the joint.

目前最常用的螺纹拧紧方法是扭矩控制法，该方法容易导致螺纹副轴向预紧力分散，联接可靠性不高。

互联网摘选

The working principle, structure and strategy and carried out means of the monolithic microcomputer fuzzy control system of the surface-ground screw pump torque are discussed.

阐述了利用模糊控制技术设计的单片机模糊地面驱动螺杆泵扭矩控制系统的工作原理、结构、策略和实现方法。

互联网摘选

Contrasting various pre-loading methods, hydraulic system is applied to control torque, the relationship of hydraulic pressure and torque is measured through tests and more visual.

本论文在对比各种旋紧方法之后，采用液压系统实现扭矩控制，通过试验测定液压压力与扭矩之间的关系，扭矩控制更加直观和准确。

互联网摘选

The torque control valve of hydraulic tong is developed to protect the scrws of tube and suck rod from being damaged or deformed caused by over tightness.

液压油管钳扭矩控制阀用于油管和抽油杆上螺纹时控制其扭矩值，以免扭矩过大而损坏螺纹或造成本体变形。

互联网摘选

Friction coefficient depends on utilization of bolt strength, torque control technology investment and assembly quality, so it has an important pact in fastener assembly.

摩擦系数在紧固件装配中起着重要的作用，因为它直接决定了螺栓强度利用率的高低、扭矩控制工艺投资、装配质量的评定。

互联网摘选

Problems such as cuttings transportation, wellbore failure, cuttings bed building, friction drag and torque control and formation damage potentially exist in this well.

该井钻井液存在携砂困难、井壁易失稳、易产生岩屑床、摩阻扭矩控制难度大、储层易受污染等技术难点。

互联网摘选

A torque control simulation model was built in order to facilitate the design and simulation of control strategies for an electronic unit pump system.

以电控单体泵控制系统的开发为研究背景，建立了基于扭矩控制的电控单体泵柴油机仿真模型，以利于电控单体泵控制策略算法的开发与仿真研究。

互联网摘选