tool surface的例句大全

Sheet forming tests were carried out to study the changing of tool surface micro-geometry in stamping process and its effect on surface galling of parts.

实验研究了高强度钢板成形过程中模具表面形态的演化规律及其对冲压件表面损伤的影响。

互联网摘选

Several motion manners of the carbide tool surface grinder were introduced.

作者首先介绍了硬质合金刀片端平面研磨机的几种运动方式；

互联网摘选

This method is to control lapping parameters, make lapping tool wear well distributedly and thus assures lapping tool surface accuracy.

通过控制研磨参数，使得磨具磨损均匀，从而保证磨具面形精度。

互联网摘选

Normal pressure, temperature of tool surface and relative sliding velocity between tool and workpiece are obtained through the above finite element analysis.

利用二维热力耦合有限元模型对不锈钢时的切削过程和热传递过程进行了仿真分析，得到了刀具表面的应力、温度以及刀具与工件之间的相对滑移速度。

互联网摘选

This paper presents some technological barriers in producing the new secondary mirror for Φ 2.16m telescope and introduces the methods which have been adopted to resolve these technical problems. The possibility that optical surface is produced smoothly by selecting suitable shape of tool is discussed.

介绍了Φ2.16m望远镜新副镜加工中的一些工艺难点及所采取的方法，定性分析了选择合适的工具形状，使镜面面形平滑过渡的可能性。

互联网摘选

But the low thermal conductivity, anisotropy and laminated structural lead to the high cutting force, tool wear seriously and bad machined surface quality when form milling the CFRP. This makes CFRP cannot be spread in the world.

但是，CFRP的导热性差、各向异性及层合结构等特点导致其在成形齿槽铣削的过程中容易出现铣削力过大、刀具磨损严重和加工质量难以保证等缺点，严重影响其推广应用。

互联网摘选

This article analyzes the change regularity of tool vibration and turface roughness on workpiece, and the relationship between vibraton and surface roughness to different cutting output in the finishing through cutting test.

本文通过切削试验，分析了在精加工条件下，对于不同的切削用量，刀具振动参量以及工件表面粗糙度变化的规律性，以及振动与表面粗糙度的关系。

互联网摘选

High Speed Spherical Surface Lapping Tool Wearing Without Surface Shape Accuracy Decreasing

球面磨具保形磨损高速研磨

互联网摘选

To achieve machining characteristics of brittle materials on the nanometer scale using an AFM diamond tip as the cutting tool, scratching tests and machining tests were carried out on the surface of monocrystal silicon based on AFM.

为获得AFM金刚石微探针在纳米尺度上加工脆性材料的加工特性，在AFM系统上对单晶硅表面进行了刻划、加工实验。

互联网摘选

High frequency movement in precise micro-displacement of the tool is required when boring the hole and the displacement of the tool needs to be changed according to its spindle rotation angle and its axial position in boring process, because the hole has a very complex three-dimensional surface.

非圆曲面孔复杂的三维空间曲面结构，要求在镗削过程中，刀具径向位置随着主轴转角和其轴向位置的变化，做高频响的精密微位移补偿运动。

互联网摘选

A new method of establishing general geometric model of spiral surfaces of flute of a special revolving tool is presented in terms of the characteristic of NC grinding spiral surface of flute.

针对数控磨削螺旋槽的特点，提出了基于一般特种回转面刀具刀刃曲线和刀面截形的螺旋槽通用几何模型。

互联网摘选

Surface Rolling Process of Car's Hub by Diamond Turning Tool

金刚石表面金属化用金刚石车刀抹平加工汽车轮毂

互联网摘选

In this paper to the 2-dimensions arbitrarily the shape flat surface carries on tool path generation, the adoption have to of closing wreath carry on the description to the slot form boundary, use offset curves method make tool path generation.

本论文对二维任意形状平面区域进行刀具轨迹的自动生成，采用有向的封闭环对边界进行描述，通过构造等距线法求解刀具轨迹。

互联网摘选

When grinding of narrow and deep slot, grinding temperature is very high, which is easy to cause burns of element surface, reduce machining accuracy and shorten tool service life.

窄深槽磨削时磨削温度很高，易使工件表面烧伤，加工精度降低，刀具的寿命缩短。

互联网摘选

Tool Positioning Strategy for Free Form Surface Flank Grinding with Drum Wheel

鼓形砂轮周磨自由曲面刀位算法

互联网摘选

As the tool for elaborate manufacture of complex curve surface, the burr both bas the gener-al property of general revolving milling cutter, and has its own speciality.

旋转锉作为加工复杂曲面的精加工工具，它既具备一般回转铣刀的共性，又有其特殊性。

互联网摘选

Influences of sharpness of diamond tool cutting edge on the cutting deformation and quality of cutting surface

金刚石刀具刀刃锋锐度对切削变形和加工表面质量的影响

互联网摘选

The Way to Reduce Distortion of Machine Tool Slide Guide During Surface Hardening

减少机床导轨表面淬火畸变的措施

互联网摘选

The reasons causing distortion of machine tool slide guide during surface hardening was analyzed and the way to reduce distortion was offered and the good result is obtained.

对机床导轨表面淬火畸变的原因进行了分析，提出了控制机床导轨表面淬火畸变的措施，应用效果明显。

互联网摘选

Modeling study on tilt-rotor's aeroelastic stability in cruise flight Surface Improvement Based on Springback Compensation for Aircraft Skin Stretching Tool

前飞状态倾转旋翼机气弹稳定性建模基于回弹的飞机蒙皮拉形模型面修模技术研究

互联网摘选