elastic modulus的例句大全

Influence of Trace Element Alloying and Thermomechanical Treatment on Elastic Modulus of Cu Based Alloy

合金化与形变热处理对铜合金弹性模量的影响

互联网摘选

Methods Flexural strength and elastic modulus were measured by three-point bending test at selected temperatures from 830 C to 950. X-ray diffraction was used to investigate the type of crystal and crystal percentage.

方法按不同晶化温度条件分组，利用X射线衍射技术鉴定晶相，计算晶体含量，并采用三点弯曲法测定各组的抗弯强度和弹性模量。

互联网摘选

The computative method can be used to explain the influence of texture on anisotropy and to evaluate the elastic modulus of the samples and directions measured difficultly.

这种方法可用于分析织构对各向异性的影响，以及对难以检测的试样和方向作弹性模量估算。

互联网摘选

The physical properties of the silicone elastomers were investigated by changing reactant ratio. The results indicate that with the increasing of the telechelic polysiloxane, the elastic modulus and dielectric constant were enhanced and hydrophobicity descended.

对不同原料配比对弹性体物理性质的影响进行了探讨，结果表明随着遥爪聚硅氧烷含量的增加，弹性体弹性模量和介电常数逐渐增大，其疏水性逐渐降低。

互联网摘选

The tensile impact experimental results show that the initial elastic modulus and unstable strain of PE fibre bundles are temperature and strain-rate dependent, except for the failure stress of PE fibre bundles.

实验结果表明：PE纤维束的初始弹性模量和失稳应变具有一定的温度和应变率相关性，但是破坏应力变化不大。

互联网摘选

When the equivalent elastic modulus is determined by the presented test method, the thickness of the work hardened layer can be assumed arbitrary in the proper range, which hardly affects the calculated results.

采用本文提出的试验方法确定硬化层的等效弹性模量时，可以在合理范围内任意假定硬化层的厚度。

互联网摘选

Analysis of Equivalent Elastic Modulus of Single-Walled Carbon Nanotube Under Bending and Tensile Load

碳纳米管弯曲和拉伸等效弹性模量的计算分析

互联网摘选

Stress-strain curves of rock tension and tensile elastic modulus are obtained based on the tests.

为此，该文对32件砂岩、大理岩、花岗岩岩石试件进行了三点弯曲拉伸试验，获取其抗拉强度，绘制了岩石拉伸应力-应变曲线，给出了拉伸弹性模量。

互联网摘选

Effective Digit of Elastic Modulus in Tensile Test of Metal Materials

金属材料拉伸试验中弹性模量的有效位数

互联网摘选

The elastic modulus, tensile yield stress, fracture stress, and elongation of n Cu are 0.65, 1.42, 1.82 and 0.15 times of that of p Cu, respectively.

纳米铜的弹性模量、屈服强度、断裂强度和延伸率分别为多晶粗晶铜的0.65,1.42,1.82和0.15倍。

互联网摘选

The results showed that the notched Izod impact strength and conservation rate of tensile yield stress of HDPE E-TMB were markedly superior to those of HDPE elastomer, while the conservation rate of elastic modulus in bending of HDPE E-TMB and HDPE elastomer was nearly the same.

结果表明，HDPE/ETMB的悬臂梁缺口冲击强度的提高幅度、拉伸屈服应力保持率均显著优于HDPE/弹性体，二者的弯曲弹性模量保持率基本相同；

互联网摘选

The simultaneous measurement of the tensile strength, yield strength, stretching rate, elastic modulus, peel strength and power-of time, of a displacement curve.

可同时测量材料的抗拉强度、屈服强度、伸缩率、弹性模量、剥离强度及力-时间，力一位移曲线。

互联网摘选

By contrast, under tension, the elastic modulus of hard rock is relatively large at the beginning stage and then decreases with loading.

而单轴拉伸下，硬岩的弹性模量初始较大，随后随着载荷增大而逐渐减小。

互联网摘选

In this paper, the influence of self-compacting concrete constituents on compressive and splitting tension strengths and elastic modulus was studied by multivariate regression analysis.

本文采用多元线性回归分析方法研究了影响自密实混凝土抗压强度、劈拉强度及弹性模量等力学性能的主要因素；

互联网摘选

Finally, by employing mechanical properties test, it shows that the tension strength, elastic modulus and micro-hardness of Mg-Ti alloys have increased evidently with joining Ti due to the high tension strength and melting point as well as high elastic modulus of Ti.

通过对Mg-Ti合金进行力学性能测试表明，在Mg中加入高强度、高熔点、高弹性模量的Ti，显著提高了材料的抗拉强度、弹性模量和显微硬度，且它们随着Ti含量的增加而增加。

互联网摘选

The pitting corrosion damage of pipeline was considered as uniform hole-type damage based on the damage theory. The degradation regularity of apparent yield strength and elastic modulus of damaged pipeline steel was investigated by tension test of specimen with artificial holes.

基于损伤理论，将管壁点腐蚀损伤层材料视作孔洞型均匀损伤材料，通过模拟多孔材料拉伸实验，研究了孔洞型损伤管线钢表观弹性模量和屈服强度退化规律。

互联网摘选

Borehole Televiewer and Borehole Elastic Modulus Test for Transmission Cable Tunnel in Singapore Drilling elastic modulus test on gneiss of dam foundation for Longjiang hydropower station

钻孔电视和钻孔弹模在新加坡电力电缆隧道工程中的应用龙江水电站片麻坝基钻孔弹性模量试验

互联网摘选

Mechanical performance test includes the cube compressive strength, elastic modulus, axial compressive strength and flexural strength test.

力学性能试验包括立方体抗压强度、弹性模量、轴心抗压强度和抗折强度试验。

互联网摘选

A new method of measuring the dynamic elastic modulus of paper for loudspeaker

扬声器纸盆材料动态弹性模量的新测量方法

互联网摘选

Applying classical wave theory, a concept of equivalent elastic modulus on propagation speed modification of guided wave through "variable cross-section" of metal bar embeded layer was put forward.

运用波动的经典理论，提出了导波在金属杆嵌入层“变截面”传播时波速改变的“等效弹性模量”的概念。

互联网摘选