bending fatigue的例句大全

Effect of Surface Defects on Bending Fatigue Behavior of High Strength Spring Steel

表面缺陷对高强度弹簧钢弯曲疲劳性能的影响

互联网摘选

The bending fatigue property of every part of the rail

钢轨各部位的弯曲疲劳性能

互联网摘选

At present, tuning-folk resonance plate structure is common used in crankshaft bending fatigue test bench in domestic diesel engine industry.

目前，国内柴油机行业普遍使用的曲轴弯曲疲劳强度试验台架，均采用音叉共振板结构。

互联网摘选

On the rail chair, positive bending moment fatigue, 2 millions load conversions on one sleeper.

在轨座上，正弯矩疲劳度测试，一个枕木对应两百万载荷的转换量。

互联网摘选

The life of bending fretting fatigue was significantly influenced by the alternating stresses. The higher stress level was, the lower fatigue life occurred. The S-N curves of bending fretting fatigue appeared shapes of C type.

对于弯曲微动疲劳，交变应力对寿命的影响十分显著，应力水平越高，微动疲劳寿命越低，弯曲微动疲劳的S-N曲线呈C曲线型。

互联网摘选

Testing method for flexural fatigue of rigid plastics by plane bending

硬质塑料板的平面弯曲疲劳测定法

互联网摘选

The superiority of this design over the conventional one will reveal itself in the studies on the mechanisms of crack initiation and growth in fatigue process under bending condition.

这种等应力试样在研究弯曲疲劳，尤其是在弯曲条件下研究疲劳过程中裂纹产生和扩展机理时，将显示出明显的优越性。

互联网摘选

Based on the analysis of the fatigue notch factor of welded joints, the difference between the fatigue strength of welded joints under tension load and that under bending load is presented.

基于场强法理论得到的疲劳切口系数，有效的预测了焊接接头在承受拉伸载荷和弯曲载荷时的疲劳强度差异。

互联网摘选

Fatigue Durability Testing of Differently Shaped Screws under Combined Tension and Bending Load

不同类型螺栓复合拉弯时的疲劳强度研究

互联网摘选

Design of a Simple Fatigue Bending Machine for Plate

简易平板弯曲疲劳试验机的设计

互联网摘选

According to the standard, the specimen with prefabricated fatigue crack has a standard 3 points bending shape that has a rectangular section of B × 2B ( B: specimen thickness) and notch orientation of thickness direction.

取尺寸为B（板厚）×2B、缺口方向为板厚方向、带预制疲劳裂纹的标准试样进行三点弯曲试验。

互联网摘选

The experimental results of tensile, fatigue and three point bending test show that the tensile strength, plasticity and fatigue life are improved simultaneously.

而拉伸、疲劳和三点弯曲实验结果表明，随焊冲击碾压之后接头的抗拉强度、塑性及疲劳寿命等力学性能也都得到不同程度的提高。

互联网摘选

pulsating fatigue strength under bending stress

脉动抗弯疲劳强度

互联网摘选

fatigue strength under reversed bending stress

反复弯曲应力疲劳强度

互联网摘选

Experiment research on rotational bending together with thermal fatigue for metal

金属材料旋弯&热疲劳的试验研究

互联网摘选

In this paper, the distribution of biaxial bending strength and the influence of loading rate on fatigue strength in the biaxial bending test by use of soda-lime glass specimen with micro indentation crack are studied.

本文研究了带有微小压痕裂纹的钠钙玻璃试件在惰性环境中的双轴向弯曲强度分布和加载应力速率对试件疲劳强度的影响。

互联网摘选

For the fatigue life evaluation of bending member, this paper studies this from two aspects.

对于受弯构件的疲劳寿命评估，本文主要从两方面进行研究。

互联网摘选

on the rail bed, positive bending time fatigue test, on one sleeper 2 million load cycle.

在钢轨底座上进行正弯时间疲劳测试，每根枕木上为2百万的负重循环。

互联网摘选

The optimization for bending stiffener is performed with fatigue probabilistic restraint.

考虑疲劳概率性的约束，对弯曲加强器进行优化设计。

互联网摘选

Development of the elf Adaptive Resonant Crankshaft Fatigue Bending Machine

自适应共振式曲轴弯曲疲劳试验机的研制

互联网摘选