Specimen preparation, testing methods, well-bonded fiber, bridging fiber, broken fiber, residual stress, stress transfer, interface slip and friction shear stress were described in details.

1、

The shear strengths of slip soils is the stress of the test study, which involves peak shear strength ( fully softened shear strength) and residual shear strength.

其中，滑带土的强度特性是本次研究重点，包括峰值强度（完全软化强度）和残余强度。

互联网摘选

2、

Grain rotation which produces crack on the grain boundary was caused by force couple because slip is obstructed and stress concentrated on the grain boundary;

滑移在品界受阻产生应力集中并产生力偶使晶粒发生相对转动，从而在品界产生裂纹；

互联网摘选

3、

On basis of the wafer twist and slip model, the stress state of the small slice are studied.

结合晶片扭曲和滑移的模型，分析了小晶片的受力状况。

互联网摘选

4、

We use a finite element method to study evolution of theoretical displacement, stress and strain field with a growing displacement applied at the remote plate ends, when fault slip and frictional stress are not given in advance but are determined in the solving process.

使用有限元素法研究了理论位移场、应力场和应变场随远场位移的演变情况。此时，断层位移和磨擦应力并不是预先给定而是在求解过程中同时确定的。

互联网摘选

5、

Some practical formulas of nonlinear analysis are obtained for calculating the bond stress, the slip and the stress of steel bar.

得出了计算粘结应力、滑移及钢筋应力的非线性实用公式。

互联网摘选

6、

Theoretical Analysis on Slip and Contact Stress Characteristics of Tooth Flanks of Rack and Sector Gear with Variable Ratio

变速比变厚齿扇齿面滑移及接触应力特性的理论分析

互联网摘选

7、

Variable ratio; Rack; Sector gear; Slip; Contact stress;

变速比；齿条；齿扇；滑移率；接触应力；

互联网摘选

8、

The influence of the variable ratio on the slip and contact stress is also discovered.

揭示了速比变化比值对齿面滑移及齿面接触应力特性的影响。

互联网摘选

9、

Stability Analysis of Deep Foundation Pit Soil Nailing Supporting Structure Based on Finite Element Slip Surface Stress Method

基于有限元滑面应力法的深基坑土钉支护结构稳定性分析

互联网摘选

10、

Influence of fault slip on stress field around it

断层滑动对邻近场的影响

互联网摘选

11、

The limit equilibrium method and finite element analysis method are currently the main method of slope stability analysis. Finite element method includes finite element strength reduction and FE slope method based on slip stress.

极限平衡法和有限元分析方法是目前进行边坡稳定分析的主要方法，其中有限元法包括有限元强度折减法和滑面应力分析法。

互联网摘选

12、

FE slope stability method based on slip stress optimized.

基于滑面上应力优化的土坡稳定分析方法。

互联网摘选

13、

This method can provide experimental basis for the study of self-stress distribution of the clamp grout. Thirdly, the empirical formula for relationship between expansive pressure and slip stress that suitable for FEA expansive agent is proposed.

第三，提出了适用于FEA膨胀剂的膨胀压力与滑动应力间关系的经验公式。

互联网摘选

14、

Tyre-lock chain Black slip stopper

胎锁链（轮胎防滑）布勒克滑钩链制动器

互联网摘选

15、

According to the slip theory of rolling object under the effect traction from contact mechanics, the slip ratio and the slip speed are expressed.

根据接触力学关于有牵引力状态下滚动体的打滑理论，建立滑移比、滑移距离表达式。

互联网摘选

16、

The slip viscosity can be reduced, the slip exhausting speed of bodies can be increased, and their drying cycle can be shortened, adding the sodium polyphosphate and phosphorus components.

添加多磷酸钠和含磷成分可以降低泥浆的粘度，提高坯体的排浆速度，缩短干燥时间。

互联网摘选

17、

Research of the Slip Control-Based System of Speed Sensorless

无速度传感器转差频率控制系统的研究

互联网摘选

18、

This thesis has probed several primary methods of speed estimation and found the suitable method of estimating speed without the speed sensor in the real-time DTC system, which namely to slip the speed dynamic computation method.

同时，探讨了几种主要的转速估计方法，比较其优缺点，寻找到了适合于实时直接转矩控制的无速度传感器的速度计算方法，即动态速度估计法。

互联网摘选

19、

Furthermore, the influence of slip linear speed on static friction factor has been discussed.

还探讨了打滑线速度对静摩擦系数的影响。

互联网摘选

20、

Feasibility study of a change from slip regulating speed to frequency converted regulating speed

关于滑差调速改变频调速的可行性研究

互联网摘选